-
ergocar_flex_main_picture.jpg (80.48 kB)
- Sleek design, clean lines and modern
- High-quality aluminum/steel construction
- Excellent stability (load capacity up to 80 kg)
- Height of shelves can be adjusted
- Mousepad can be mounted on the right or left, no tools required
- New basket can be mounted on the right or left, no tools required
- Safe and easy maneuvering due to twin casters
- Surfaces designed for easy disinfection
- Various heights available
- Available in several colors
- Wide range of modular extensions
Equipment carts
ergocar flex
- Sleek design, clean lines and modern
- High-quality aluminum/steel construction
- Excellent stability (load capacity up to 80 kg)
- Height of shelves can be adjusted
- Mousepad can be mounted on the right or left, no tools required
- New basket can be mounted on the right or left, no tools required
- Safe and easy maneuvering due to twin casters
- Surfaces designed for easy disinfection
- Various heights available
- Available in several colors
- Wide range of modular extensions
Details
The support column and shelves are made of aluminum with high-end, hygienic and scratch-resistant powder coating. The base is made of steel with a plastic cover. The elaborate design offers a total load capacity of 80 kg in spite of its low own weight.
All shelves are made of aluminum and then powder-coated and can support loads of up to 20 kg (surface load). The shelf width is designed to easily accommodate a standard keyboard. Convenient grip handles for easy moving of the equipment cart are available in various designs and colors.
The grooves in the support column allow flexible and individual positioning of components – expansions can also be attached at any height to the rear of the support column.
Coated sheet steel mousepads can be attached to all shelves with or without drawers using magnets (no tools required) – either on the right or left side.
All drawers of the ergocar series are equipped with a soft self-closing mechanism. A variant with a cable outlet above the front panel is available for applications with wired probes (e.g., CTG) – this prevents crushing the probe cable when closing the drawer.
The spacious support column guides the cables for data and for power supply. The cable duct covers can be easily removed upwards to allow quick access to the cable duct. Flexible brushes protect cables and connectors at any exit point in the support column.
The high-quality storage basket made of coated sheet steel can be attached to storage shelves with or without drawers on both sides without tools thanks to magnets.
With the help of special brackets for gas cylinders (2 L or 10 L), the ergocar can be expanded to a full-fledged ergospirometry workstation.
A special bracket (mounting plate) for DT80/DT100 suction pumps, perfect for saving space and ensuring stable integration of the suction system. Advantages: space-saving design, stable, easy to mount, stepless positioning.
From a simple 19” TFT monitor to a dual monitor system with two 24” TFT monitors, the modular monitor brackets of the ergocar flex system with standardized VESA mounting panels in various sizes are always the right solution.
The PC bracket allows for attaching a PC with a so-called SFF (small form factor) housing directly underneath a shelf. A bracket for mounting on the outside of the central column is available for larger computers (desktop housing) (see Options/Accessories).
A universal bracket on the outside of the equipment cart column enables the secure attachment of desktop PCs.
Adapters for the extension arms and brackets for the suction pumps are available for all commercially available suction electrode systems (Strässle, custo med, GE KISS).
A wide range of power strips in various national variants (Europe, UK, Switzerland, USA and Australia) can be mounted in the column’s power supply duct – either with or without a central on/off switch.
The compact slide-out keyboard tray with pull-out mousepad can be mounted anywhere on the support column under a shelf. If the equipment cart is in mobile use, a standard keyboard can easily slide under the shelf.
Medical isolating transformers for reducing leakage currents are available in different configurations and are installed in the cart base to save space. In addition, extensions for RS-232, USB and LAN cables can be run from the data cable duct to the backside of the isolation transformer housing.
Options/accessories
-
Accessories
Basket small, for shelf, side mounted
- Maximum load 1.5 kg
- L 340 x D 120 X H 90 mm
- Please specify left/right mounting side when ordering
Part number : 173408
Keyboard drawer
- Maximum load 1.5 kg
- Mouse and keyboard shown for illustration purposes only and not included
Part number : 173410
Mousepad
- Maximum load 1.5 kg.
- Please specify left/right mounting side when ordering!
Part number : 173409
Twin monitor holder > 19“ (VESA 75/100)
- Maximum load 15 kg
Part number : 171244
-
System components
Basic frame (high) (1188 mm)
- Specify colour for cover when ordering!
Part number : 173201.xx
Basic frame (low) (991 mm)
- Specify colour for cover when ordering!
Part number : 173200.xx
Drawer high (w/o handle)
- Drawer (LxBxH) 274x360x97 mm
- The installation height must be specified when ordering.
Part number : 173214
Drawer high (with handle)
- Drawer (LxBxH) 274x360x97 mm
- The installation height must be specified when ordering
Part number : 173215
Drawer standard
- Drawer (LxBxH) 274x360x70 mm
- The installation height must be specified when ordering.
Part number : 173212
Drawer standard (for handle)
- Drawer (LxBxH) 274x360x70 mm
- The installation height must be specified when ordering.
Part number : 173213
Handle standard
- Specify colour for handle when ordering!
Part number : 173220.xx
Shelf
- The installation height must be specified when ordering.
Part number : 173210
Shelf (for handle)
- The installation height must be specified when ordering.
Part number : 173211
-
Power supply
Interface USB, LAN, RS232 extension (w/o transformer, EU)
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173334
Interface USB, LAN, RS232 extension (w/o transformer, US)
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173335
Isolation transformer 110V/10A/IEC 60601
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173333
Isolation transformer 110V/10A/IEC 60601 with USB, LAN, RS232 extension
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173333.303
Isolation transformer 4A/IEC 60601
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173330
Isolation transformer 4A/IEC 60601 with USB, LAN, RS232 extension
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173330.303
Isolation transformer 5A/IEC 60601
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173331
Isolation transformer 5A/IEC 60601 with USB, LAN, RS232 extension
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173331.303
Isolation transformer 6A/IEC 60601
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173332
Isolation transformer 6A/IEC 60601 with USB, LAN, RS232 extension
W/o socket strip, must be included in initial order (not upgradable)!
Part number : 173332.303
Socket strip 11-way with central on-off switch (US)/for isolation transformer
W/o isolation transformer, must be included in initial order (not upgradable)!
Part number : 173305.302
Socket strip 6-way with central on-off switch (CEE7)
* Must be included in initial order (not upgradable)!
Part number : 173301.301
Socket strip 6-way with central on-off switch (CEE7)/for isolation transformer
* W/o isolation transformer, must be included in initial order (not upgradable)!
Part number : 173301.302
Socket strip 7-way with central on-off switch (UK)
* Must be included in initial order (not upgradable)!
Part number : 173303.301
Socket strip 7-way with central on-off switch (UK)/for isolation transformer
W/o isolation transformer, must be included in initial order (not upgradable)!
Part number : 173303.302
Socket strip 8-way with central on-off switch (CH)
* Must be included in initial order (not upgradable)!
Part number : 173302.301
Socket strip 8-way with central on-off switch (CH)/for isolation transformer
W/o isolation transformer, must be included in initial order (not upgradable)!
Part number : 173302.302
Socket strip 9-way with central on-off switch (AU)
Part number : 173304.301
Socket strip 9-way with central on-off switch (AU) / for isolation transformer
W/o isolation transformer, must be included in initial order (not upgradable)!
Part number : 173304.302
Socket strip11-way with central on-off switch (US)
* Must be included in initial order (not upgradable)!
Part number : 173305.301
Additional views
Technical details
Product Information
Dimensions and weight (short and tall)
ergocar flex (short)
| Width: | 660 mm |
| Depth: | 680 mm |
| Height: | 930 mm |
| Weight: | approx. 38 kg |
ergocar flex with packaging (with pallet)
| Length: | 1000 mm |
| Width: | 750 mm |
| Height: | 1150 mm |
| Weight: | approx. 56 kg |
ergocar flex (tall)
| Width: | 660 mm |
| Depth: | 680 mm |
| Height: | 1190 mm (without monitor) |
| Weight: | approx. 57 kg |
ergocar basic with packaging
| Length: | 1000 mm |
| Width: | 750 mm |
| Height: | 1400 mm |
| Weight: | approx. 77 kg |
User manual and downloads
The user manual, documents, software and technical specifications can be downloaded here – free of charge.
Show more content
Questions about the product
Do you have questions about our products?
We look forward to receiving your calls
telephone +49 7431 9894 0
or your mail message